Hastelloy B2 is a solid solution strengthened, nickel-molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, acetic and phosphoric acids. Molybdenum is the primary alloying element which provides significant corrosion resistance to reducing environments. This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone.
This nickel alloy provides excellent resistance to hydrochloric acid at all concentrations and temperatures. In additions, Hastelloy B2 has excellent resistance to pitting, stress corrosion cracking and to knife-line and heat-affected zone attack. Alloy B2 provides resistance to pure sulfuric acid and a number of non-oxidizing acids.
Alloy B-2 has poor corrosion resistance to oxidizingenvironments, therefore, it is not recommended for use in oxidizing media or in the presence of ferric or cupric salts because they may cause rapid premature corrosion failure. These salts may develop when hydrochloric acid comes in contact with iron and copper. Therefore, if this alloy is used in conjunction with iron or copper piping in a system containing hydrochloric acid, the presence of these salts could cause the alloy to fail prematurely. In addition, this nickel steel alloy should not be used at temperatures between 1000° F and 1600° F because of a reduction in the ductility in the alloy.
|Density (lb./ in^2) @ RT||0.283|
|Modulus of Elasticity in Tension (psi x 10^6)||28.6|
|Specific Heat (BTU/o F/lb.)||32 to 212 oF||0.12|
|Thermal Conductivity (BTU/hr/ft^2/ft)||212oF||9.4|
|Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F)||32 to 212oF||8.7|
|32 to 600oF||9.7|
|32 to 1,000oF||10.2|
|Electrical Resistivity (micro ohms - cm)||at 70oF||69|
|Melting Point Range (oF)||2550/2650|
|Oxidation Resistance - Continuous Service(oF)||1550|
|Oxidation Resistance - Intermittent Service(oF)||1500|
|Pipe Smls||Pipe Welded||Tube Smls||Tube Welded||Sheet/Plate||Bar||Forging||Fitting|
|Product||Tensile Min. (ksi)||.2% Yield Min. (ksi)||Elongation Min.|
|Rod & Bar||110||51||40|
|Welded Pipe & Tube||110||51||40|
|Seamless Pipe & Tube||110||45||40|
Jainex Steel and Metal exports Hastelloy B2 Round Bar to countries like Saudi Arabia, United Arab Emirates, Singapore, Malaysia, Germany, Iran, United Kingdom, Italy, Israel, Russia, United States Of America, South Africa, Kenya, Nigeria, Phillipines.