Call Now:

+91 (22) 23873091

Suppliers & Exporters ofSteel & Metal Products

Inconel 601 Round Bar
Call US : +91-22 - 23873091

66109398 / 66394240

Email: Get Quote's

Inconel 601 Round Bar

Inconel 601 nickel-chromium-iron alloy is a general-purpose engineering material for applications that require resistance to heat and corrosion. The outstanding characteristic of Inconel 601 is its resistance to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded. The limiting chemical composition of Inconel 601 is listed in Table 1. The composition is a face-centred-cubic solid solution with a high degree of metallurgical stability. The alloy’s nickel base, in conjunction with a substantial chromium content, provides resistance to many corrosive media and high-temperature environments. Oxidation resistance is further enhanced by the aluminium content.

Characteristics :

The most important property of Inconel 601 is resistance to oxidation at very high temperatures up to 1250C. Even under severe conditions such as, cyclical heating and cooling. This is possible due to Inconel 601 having a tightly adherent oxide layer which is resistant against spalling. Resistance to carburization is good, also resistant to carbon nitriding conditions. Due to high chromium and some aluminium content, good resistance in oxidizing sulphur bearing atmospheres at elevated temperatures is demonstrated.

Applications :

Trays, baskets and fixtures used in various heat treatments such as carburizing and carbon nitriding. Refractory anchors, strand annealing and radiant tubes, high velocity gas burners, wire mesh belts etc. Insulating cans in ammonia reformers and catalyst support grids used in nitric acid production. Thermal reactors in exhaust system of petrol engines. Fabricated combustion chambers. Tube supports and ash trays in the power generation industry.

Chemical Requirements

  Ni Cr C Mn Si S Fe
Max 63 25 0.1 1 1 0.015 Bal
Min 58 21          

Physical Properties :

Density 8.1 g/cm cube
Specific Heat 461 J/kg K
Electrical Resistivity 119 micro ohms cm
Curie Temperature -190 C
Melting Range 1320 - 1370 C
Thermal Expansion(10-6K) 14.9 (20-300 C)

Tensile Data :

Density 8.1 g/cm cube
Specific Heat 461 J/kg K
Electrical Resistivity 119 micro ohms cm
Curie Temperature -190 C
Melting Range 1320 - 1370 C
Thermal Expansion(10-6K) 14.9 (20-300 C)

Specifications :

Sheet ASTM B168 Din 17750
Plate ASTM B168 Din 17750
Forging Din 17754
Weld Wire FM 82
Weld Electrode FM 617
Din 2.4851

Machining Data :

Carbide tools are suggested for rates better than 50% of Type 304. Machining Type Suggested starting rates are:

Machining Type Suggested starting rates are:
Single Point turning : Roughing - 0.15" depth, 0.015"/rev feed -175 SFM 
  Finishing - 0.025" depth, 0.007"/rev feed - 200 SFM
Drilling : 1/4" Dia hole - 0.004"/rev feed - 60 SFM 
  1/2" Dia hole - 0.007"/rev feed - 60 SFM 
  3/4" Dia hole - 0.010"/rev feed - 60 SFM
Reaming : Feed - same as drilling - 100 SFM
Side and Slot Milling : Roughing - 0.25" depth - 0.007"/tooth feed - 125SFM 
  Finishing - 0.050" depth - 0.009"/tooth feed - 140SFM

These rates are for carbide tools, Type C-2 for roughing, drilling and reaming. Type C-3 for finishing.

Jainex Steel and Metal exports Inconel 601 Round Bar to countries like Saudi Arabia, United Arab Emirates, Singapore, Malaysia, Germany, Iran, United Kingdom, Italy, Israel, Russia, United States Of America, South Africa, Kenya, Nigeria, Phillipines.

Our Products