- Shop No-1,Khetwadi Lane,
- Mumbai - 400004
- +91 98195 74882
- export@jainexsteel.com
Titanium Grade 2 Sheet and Plate
We are suppliers of Exporter, Supplier and Manufacturer of Titanium Grade 2 Sheet and Plate. Buy these Titanium Grade 2 Sheet and Plate in various materials and grades such as UNS R50250, ASTM B 265, ASME SB 265, Sheet Coil & Plates Grade 2 titanium is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability. It shares many of the same qualities as Grade 1 titanium, but it is slightly stronger. Both are equally corrosion resistant. This grade possesses good weldability, strength, ductility and formability.
This makes Grade 2 titanium bar and sheet are the prime choice for many fields of applications:
- Architecture
- Power generation
- Medical industry
- Hydro-carbon processing
- Marine industry
- Exhaust pipe shrouds
- Airframe skin
- Desalination
- Chemical processing
- Chlorate manufacturing
Specification
| Grades | Titanium GR-2 (UNS R50400) | |
| Standard | GB / T 3621 -44 , ASTM B 265, ASME SB 265 | |
| Werkstoff Nr | 3.7035 | |
| Thickness | 1mm – 100mm | |
| Width | 1000mm – 3000mm | |
| Production | Hot-Rolled (HR) / Cold-Rolled (CR) | |
| Application: | Chemicals & Fertilizers Industries , Sugar Mills , Cement Industries , Ship Building , Paper Industries , Oil & Gas , Petrochemicals , etc |
Chemical Composition :
| C | Fe | H | N | O | Ti | |
| Max | Max | Max | Max | Max | Max | |
| 0.1 | 0.3 | 0.015 | 0.03 | 0.25 | 99.2 |
Mechnical Properties :
| Hardness, Knoop | 170 | 170 | |
| Hardness, Rockwell B | 80 | 80 | |
| Hardness, Vickers | 145 | 145 | |
| Tensile Strength, Ultimate | 344 MPa | 49900 psi | |
| Tensile Strength, Yield | 275 - 410 MPa | 39900 - 59500 psi | |
| Elongation at Break | 20 % | 20 % | |
| Reduction of Area | 35 % | 35 % | |
| Modulus of Elasticity | 105 GPa | 15200 ksi | In Tension |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poisson's Ratio | 0.37 | 0.37 | |
| Izod Impact | 114 - 171 J | 84.1 - 126 ft-lb | |
| Fatigue Strength | 300 MPa | 43500 psi | 1E+7 cycles, Unnotched |
| Fatigue Strength | 425 MPa | 61600 psi | 30,000 cycles, Unnotched |
| Fracture Toughness | 66 MPa-m½ | 60.1 ksi-in½ | K(Q); annealed |
| Shear Modulus | 45 GPa | 6530 ksi |
Physical Properties :
| Physical Properties | Metric | English | |
| Density | 4.51 g/cc | 0.163 lb/in³ |
Jainex Steel and Metal exports Titanium Grade 2 Sheet and Plate Manufacturers UNS R50250, ASTM B 265, ASME SB 265 to countries like Saudi Arabia, Bangladesh, United Arab Emirates, Brazil, Russia, Indonesia, Egypt, Iran, Kuwait, Taiwan, Oman, Qatar,
South Africa, Australia, Pakistan, Malaysia.
Titanium Grade 2 Sheet and Plate
- Titanium Grade 2 Sheet and Plate Used in Tractor
- Titanium Grade 2 Sheet and Plate Used in Automotive Trim
- Titanium Grade 2 Sheet and Plate Used in Stamped Machined Products
- Titanium Grade 2 Sheet and Plate Used in Cookware
- Titanium Grade 2 Sheet and Plate Used in Appliances
- Titanium Grade 2 Sheet and Plate Used in Kitchen
- Titanium Grade 2 Sheet and Plate Used in Foodservice Equipment
- Titanium Grade 2 Sheet and Plate Used in Sinks
- Titanium Grade 2 Sheet and Plate Used in Railway Cars
- Titanium Grade 2 Sheet and Plate Used in Trailers
Packaging:
We Jainex steel & Metal Ensure the best quality of Packing , because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as:--
- • Boxes and Crates
- • Shrink-wrapped
- • Carton boxes
- • Wooden pallets
- • Wooden boxes
- • Wooden crates
Testings (Destructive, Non Destructive):
- • Positive Material Identification - PMI Testing
- • Chemical Analysis - Spectro Analysis
- • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
- • Micro Test
- • Macro Test
- • Hardness Test
- • Pitting Resistance Test
- • Intergranular Corrosion (IGC) Test
- • Flaring Test
- • Flattening Test
- • Hydrostatic Test
- • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
- • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
- • Radiography Test
- • Dye Penetrant Test (DP Test)
- • Ultra Sonic Test (UT)
- • Eddy Current Testing
- • Impact Test
- • Bend Test
